1 / 6
Pulse XE X axis idler mount for Gates pulley [Upgraded] — zdjęcie 1
1 / 6

Pulse XE X axis idler mount for Gates pulley [Upgraded]

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Pulse XE X axis idler mount designed around the 10mm Gates pulley

Ocena
0 / 5
Polubienia
1
Pobrania
15
Wydruki
0
Wyświetlenia
195
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is the Pulse XE X axis idler mount designed around the Gates pulley. The original mounts all use the narrow Chinese smaller smooth pulley which degrades the belts. 

Models have been redesigned to allow the use of the larger 10mm wide Gates machined pulley. Also, when printing these motor mounts, it is recommended to have an 8mm reamer to adjust the linear rod holes.

Printed using petg, abs, asa, Nylon. 100% infill for maximum strength. 

Supports Required

[Updated 02-01-2025]

Added upgraded idler tensioner

Please live a “Like” Thanks for Downloading

Tagi