1 / 4
Bigger pie tokens and wedges w/ flags for Trivial Pursuit — zdjęcie 1
1 / 4

Bigger pie tokens and wedges w/ flags for Trivial Pursuit

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

25% bigger pie tokens and wedges with a "flag" on top making them much easier to handle.

Ocena
5 / 5
Polubienia
19
Pobrania
129
Wydruki
1
Wyświetlenia
554
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Board Games
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Why simply reproduce something when you can make it a little better?  Classic pie token and wedges for Trivial Pursuit, but 25% bigger and the wedges now have a “flag” making them much easier to insert/remove - helpful if you have any joint or muscle control issues.

Note: I don't have pink filament, so used purple instead.

Printed in PLA, .2mm layer height, no infill needed.  I printed on a PEI sheet and even then had to use some sheet weld/Magigoo since the “wedge” parts are so small.  Takes about 1.25 hours to print a token & 6 wedges with the settings I use.

Tagi