Basic Orbiter Mount - Ender 3, Voxelab Aquila
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed a basic mount for the LDO Orbiter that wouldn't interfere with the fan shroud I'm using on my Voxelab Aquila.…
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 795
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I needed a basic mount for the LDO Orbiter that wouldn't interfere with the fan shroud I'm using on my Voxelab Aquila. I couldn't find one exactly suited to my setup, so I took the two parts I liked from the source designs and put them together.
This design mounts without needing to remove the wheels or the hotend. It's not perfect but it has done the job so far without problems.
Edit: Newer version is beefed up and won't move around or flex when retracting.
Remixed from:
https://www.thingiverse.com/thing:4765501
https://www.thingiverse.com/thing:4609940
Print Settings
Printer:
Voxelab Aquila
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
20%
Filament:
3d filles PLA
Light Grey
Category: 3D Printer Parts