Nodo RFLink32 Enclosure (FreeCAD)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An enclosure for the new RFLink Gateway based on ESP32 by nodo-shop.nl
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 17
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
The Nodo RFLink32 is a do-it-yourself hardware kit sold by the Nodo-Shop. It features an ESP32-C3 microcontroller board designed to act as a wireless radio frequency gateway. It connects 433MHz or other low-frequency wireless smart home devices to modern automation systems using alternative open-source firmware.
Although you can order a ready to use pre mounted version by selecting an antenna, a transceiver module and the solder service, the module comes without a proper enclosure. A great opportunity to make use of the 3D printer once again!
Have fun and enjoy your printed rflink32 enclosure, or at least use it to learn something useful about FreeCAD.