Kayoumini Stronger Batterystrap Balance and XT30 Connector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A batterystrap with a balance and XT30 connector holder for the Kayoumini
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 77
- Wydruki
- 0
- Wyświetlenia
- 192
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
Information
The other designs I saw with a holder for the balance and/or XT30 connector had only one of the connectors on the strap or not at the right place. So I just modified the version with the balance connector and added an XT30 connector holder.
I've added a V2 version because the props would it the balance lead and the XT30 pigtail very easily, resulting to damage to the battery's cables when using V1. The last picture is the V1.
Printing Instructions
Print with 95A TPU
Print it in the orientation that's used in the picture below
100% infill
Other prints
My Build
For anyone who’s interested in which components I used for this build:
Frame: Kayoumini 2.5"
Motors: VCI Spark 1103 7500KV
AIO: GEPRC Taker F411 12A AIO ELRS 2.4G
Cam: BetaFPV C03
VTX: TBS Unify Pro32 Nano 5G8 V1.1
VTX Antenna: RushFPV Cherry II UFL
Props: Gemfan Hurricane 2520
Batteries: GNB 2S 380 mAh LiHV