Eindecker Stick Grip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stick grip for a Fokker Eindecker, in 100% scale and 1/32. Made to replace a part from a 1/32 model which pinged out…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 156
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Stick grip for a Fokker Eindecker, in 100% scale and 1/32.
Made to replace a part from a 1/32 model which pinged out of my tweezers, never to be seen again.
100% scale included in case anyone wants to use it on some other scale.
Print Settings
Printer:
Zonestar D810
Supports:
No
Resolution:
The best you can manage
Filament:
Chinese cheapo PLA, but any material should be OK
Wood
Notes:
For the 1/32 model, run as slow as possible (it only takes a few seconds anyway), with the finest nozzle you have. I had to increase the size of some parts a little because Slic3r left bits out when slicing for a 0.4mm nozzle.
I trimmed the outside a little while it was still stuck to the (glass) bed.
I still wound up having to drill holes (1.5mm and micro-drills) for the openings, and file off the outside.
The beauty is that even if you destroy one trying to improve it, it costs nothing to do it again. I needed to do 3 before I got a good enough result.
How I Designed This
It's really a just that-looks-about-right model, size based on the size of my hands, and memory of the lost part. Also a couple of photos of the real thing.
Source model is publicly available OnShape.com, at https://cad.onshape.com/documents/2248e52cbd9ef175c0635c13/w/892095896f66a553f3f3cd9e/e/51739b6c630938e63554ffb7
Category: Vehicles