Peugeot 206 phone mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
After perservering with my CD phone holder for a while, I've changed tacks. This one mounts on the radio-removal holes…
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 74
- Wydruki
- 0
- Wyświetlenia
- 3945
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
After perservering with my CD phone holder for a while, I've changed tacks. This one mounts on the radio-removal holes in the factory-fitted Clarion CD player in my 2005 Peugeot 206cc. It should probably be just fine for any 2005 206, maybe any 2005 Peugeot, maybe any Peugeot, whether LHD or RHD. It will probably work OK in many other car makes and models, but obviously I can't promise anything. It has a 17mm ball for mounting the phone charger itself. This seems to be standard, from the sample (N=2) I've tested. Certainly this cellphone holder/wireless charger https://www.aliexpress.com/item/Tendway-Qi-Fast-Wireless-Car-Charger-Qc-2-0-Quick-Mobile-Phone-Charger-Gravity-Car-Phone/32910587968.html which is designed to clamp onto the the vent.
This is a one-piece design, but does need 2 x M3x30mm socket-cap screws to go into the holes. I haven't made any provision for mechanically holding the screws in the mount. I don't think it'll be a problem, but you may want to glue them into place.
NB that this is designed for the RH holes in the radio; there are cutouts in the bottom of the mount to clear the buttons. If you put it into the LH holes it may turn your radio on/off or whatever. Printing a mirror image probably won't help because the buttons are asymmetric. If you want to use the LH holes, you'll need to do a remix!
8 Jan 2019: Modified to put the phone lower. This is designed for to the charger linked above, but a bit of hot glue will attach the top of other chargers to the mount.
[Edit] Don't print using PLA -- after a day parked in the sun, your phone holder will droop. :(
Print Settings
Printer:
Zonestar D810
Rafts:
No
Supports:
No
Resolution:
Not very important... I printed with a 0.6mm nozzle
Infill:
15%, but maybe more?
Filament:
Chinese cheapo PLA, but any material should be OK
Red
Notes:
1mm minimum shell thickness in Slic3r
Remixed from my CD mounted phone holder and my radio removal key.
Or go to OnShhape.com and search Public documents for CD Phone holder... this is V6 of that design.
Category: Automotive