1 / 4
License plate light lens - Siata 208S Roadster
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a license plate light lens model I made for a 1953 Siata 208S Roadster (other models may be applicable).
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 25
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
This is a license plate light lens model I made for a 1953 Siata Roadster. I worked this up for a friends car, a 1953 Siata 208S Roadster. Additionally, this should fit some Cisitalia models and perhaps some Zagato cars. Original replacements are not available. Looks best printed in clear. I would use only with LED bulbs so PLA will work just fine. Incandescent bulbs likely make too much heat for most filaments. Print easily with no supports and minimal infill.
Enjoy!