ATX PSU Split Sides, with different Faceplates
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Original ATX Benchtop Power Supply by Kuberman Split the Sides to be printed flat and other mods
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 327
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Original ATX Benchtop Power Supply by Kuberman
Split the sides to be printed flat. Print each leg (A&B) twice.
Added M3 heatset inserts on both ends to allow customised rear plates
Added provision for XT60 Panel mount below screen.
Opened Jacks to 6.5mm for better seating of generic aliexpress poles.
Update 1:
Trim the inside corners where the legs are printed face down. This is to aid bed adhesion during print.
Added Additional Faceplates with common power switch ( XW-802 )
Moved USB sockets to make room for bigger switch.
DC Buck Boost Converter is SK120 from Aliexpress
Update 2:
Added a Removeable handle.
Requires 2x M3 inserts, 2x M3x8 screws