Peugeot 206cc 2005 Key unlock button
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The unlock button on my 2005 Peugeot 206cc key fell out. Fortunately I remembered seeing one on TV. Unfortunately, my…
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 114
- Wydruki
- 1
- Wyświetlenia
- 1054
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The unlock button on my 2005 Peugeot 206cc key fell out. Fortunately I remembered seeing one on TV. Unfortunately, my button is 11mm in diameter, whereas the one I found is much smaller. So I grabbed his, remodelled it, and this is the result
To get the two-tone effect, I inserted an @pause (Repetier firmware on my printer, other firmwares will have some other way to pause and change filament mid-print) into the G-code file at about Z = 3.8mm, printed the bottom in green and top in black.
Print Settings
Printer:
Zonestar D810
Rafts:
No
Supports:
No
Infill:
25%
Notes:
Sliced with Slic3r in adaptive mode. Printed in PLA with a 0.5mm nozzle just because that was what was on my printer. Would be much better printed with a smaller nozzle.
How I Designed This
Source is available at https://cad.onshape.com/documents/d78207013c26fc9b055d86e7/w/4342847e133e703f7ab58d3a/e/5b727c17896e61c32923cf4d
Category: Replacement Parts