1 / 2
2040 ZRIB board mount — zdjęcie 1
1 / 2

2040 ZRIB board mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Designed for a Zonestar D810, but potentially useful for other delta printers. The Zonestar D810 has its ZRIB…

Ocena
0 / 5
Polubienia
0
Pobrania
7
Wydruki
0
Wyświetlenia
140
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Designed for a Zonestar D810, but potentially useful for other delta printers.

The Zonestar D810 has its ZRIB controller board mounted underneath the top plate by default. In this position, the stepper drivers, especially the extruder, can overheat and skip steps.

My solution is to mount the controller vertically on the 2040 frame at the top of the printer. There is provision for a 4010 fan directed at the stepper driver heatsinks, but this probably isn't needed.

You will need to lengthen one of the stepper motor cables by a few inches to attach comfortably.

Print Settings

Printer:

Zonestar D810

Rafts:

No

Supports:

No

Resolution:

0.2mm

Notes:

Use an M3 screw plus T-nut to attach and mount.

How I Designed This

Onshape.com

Category: 3D Printer Parts

Tagi