Temu Mini Mating Nuc Super Adapter Ring - Stackable Beekeeping Box Extender
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
stacks single-story Temu mini nucs into a two-story setup
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 69
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Animals
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I have a few mini mating nucs from Temu, but I wanted supers because I was unhappy with their bulk. Since I couldn't find supers sold separately from two-story sets, I built my own setup to stack my single-story nucs.
My 3D printer isn't large enough to print the whole piece at once, so I printed it in four parts.
Issue found: The entrance gate of the lower-story nuc must be pulled all the way up (fully opened); otherwise, the bees can squeeze out through the gap.
Free for non-commercial use and remaking. No rights reserved as long as it's not used commercially.