D810 delta 2020 bed brace
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Whilst printing, I noticed that my bed was being pushed sideways by the nozzle, resulting in a bit of distortion to…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 120
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Whilst printing, I noticed that my bed was being pushed sideways by the nozzle, resulting in a bit of distortion to the print. So I designed these braces to screw to the bottom 2020 extrusion to lock the bed in place horizontally, but still allow vertical movement for bed levelling.
The 2020 attach is altered so that tightening the screw increased pressure against the edge of the bed.
Designed for the Zonestar D810, but possibly will work (with a bit of packing perhaps) for other delta printers with a 2020 bottom frame.
Print Settings
Printer:
Zonestar D810
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20%+
How I Designed This
OnShape.com design
Category: 3D Printer Parts