D810 carriage back
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A modification to the standard acrylic triangle that attaches wheels and carriages to the 2020 vertical. I made this…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 83
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A modification to the standard acrylic triangle that attaches wheels and carriages to the 2020 vertical.
I made this because one of my original acrylic triangles broke.
As part of the strengthening, this incorporates one of the sets of spacers into the part, which makes it a little easier to assemble.
Print Settings
Printer:
Zonestar D810
Rafts:
No
Supports:
No
Resolution:
0.25mm layers
Infill:
30%
Notes:
I printed with 6 perimeters, 5 top layers, 4 bottom layers which seems to be strong enough.
Based directly from the D810 acrylic diagram provided by Zonestar. Zonestar's spacers measure 5.9mm, so I made them the same on this.
Category: 3D Printer Parts