ZoneStar D810 Delta Spool holder support
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a modified spool holder support for a ZoneStar D810 delta printer. It replaces the original support to change…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 189
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
This is a modified spool holder support for a ZoneStar D810 delta printer. It replaces the original support to change the angle of the spool from 30 degrees to 60 degrees, to reduce the friction between spool and holder.
Many thanks to the ZoneStar people who shared their design file with me which made it much easier to create this.
[16 Aug]: Turns out this is not so good. The steeper angle means that the spool is no longer well-aligned with the extruder, so the filament is pulled across the spool and jams :(
[27 Aug]: V2 added. This moves the spool closer to the extruder.
Use M3 x 20mm screws to attach.
Print Settings
Printer:
ZoneStar D810
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
25%
Notes:
Print 2 copies.
May need a little cutting and sanding to get the lugs to fit into the top of the printer.
How I Designed This
Category: 3D Printer Parts