1 / 4
Tronxy XY2 Pro / 2E Filament run out sensor mount with filament guide — zdjęcie 1
1 / 4

Tronxy XY2 Pro / 2E Filament run out sensor mount with filament guide

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a replacement mount for the Tronxy XY2 Pro / 2E's First filament run out sensor that includes a special guide.

Ocena
0 / 5
Polubienia
0
Pobrania
6
Wydruki
0
Wyświetlenia
68
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This replaces the little black board that holds the Tronxy XY2 Pro2E's filament run out sensor for the First extruder. It can be used as it is or a 6mm  threaded boden tube fitting can be screwed into the guide and a boden tube attached. This will allow spool feeding direct from a drybox or spool roller. If you have an XY2Pro2E you will likely know the pain of using the metal overhead spool "rollers" and want to quickly get rid of them. I have made this so you can easily do that or you can upgrade the roller and keep it as this also works as a simple guide for your top mounted spool. If this is for you, I am also going to post the version I have made for extruder two's F-sensor with the same features. Image included here of both. Please excuse my very old and wet filament. Printing these just off the board and at 45 degree angles helps to strengthen the "bodeneye" so the fittings can be installed and removed more than once without breaking it. 

Tagi