Cricut Roll Holder Storage - Under Desk/Cabinet Edge Track Guides
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stores the Cricut Roll holder out of the way when not in use. Mount on the underside of a desk or cabinet, or on a wall!
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 32
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
The Cricut roll holder (for the popular Cricut vinyl cutter machines, models Cricut Explore 3, 4 & 5 and Cricut Maker 3 & 4) is an awkward and cumbersome piece of kit to store when not in use. So, it makes sense to store out of the way. This print is a right and left track guide to be mounted on the underside of a desk or cabinet (or I guess it could go vertically on a wall too) to hold the side edges of the roll holder. The roll holder can easily be slid in and out. Secure each side with 2 x #8 countersunk screws (so 4 screws in total). I went with a screw length of 3/4" into plywood.