Stabilo Woody 3in1 Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A case with lid for storing the 10pcs Woody 3in1 pencil set
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 43
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
I don't know if this counts as a remix since I designed it from scratch in Fusion360, but I really want to give a big shoutout to hxr's crayon holder which heavily inspired this case here:
Mine uses the same principle, pencil goes in, lid goes on top.
The lid was designed with too big a margin, the first print I did fit well, but it didn't really hold by itself. So I reprinted the part in 98,6 % size and it fits very well, maybe a bit too tight. In the Bambu Studio 3mf file I scaled it to 99 % which should be the sweet spot for my X1C.
I also added my f3d file as well as a unchanged 3mf, since I think that Bambu Studio 3mf's are not super compatible with other slicers.
Prints without supports and is quite sturdy in PLA.