P365 15rd Magazine Grip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sig Sauer's 15rd magazine for the P365 does not come with a palm rest like the 12rd magazine does. This makes shooting…
- Ocena
- 0 / 5
- Polubienia
- 29
- Pobrania
- 156
- Wydruki
- 1
- Wyświetlenia
- 2058
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution
Sig Sauer's 15rd magazine for the P365 does not come with a palm rest like the 12rd magazine does. This makes shooting it awkward and uncomfortable. I decided to design and print my solution to this problem and share that solution with the community. To attach the print to the magazine: Clean the surfaces with isopropyl alcohol or any similar cleaning solution. Rough up the surfaces of the magazine and the bottom of the print with sandpaper. I then used JB weld (any good epoxy will do) and a clamp to attach the two surfaces. Leave for a couple hours to allow for the epoxy to cure. When clamping, make sure the bottom (in relation to the firearm) of the print is flush with the bottom of the metal part of the magazine. If not, you will have to sand/melt the top part of the print in order for the magazine to seat reliably in the firearm.
Designed in Solidworks
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Infill:
100
Filament:
Doesn't matter (I used overture 1.75mm) PLA
Doesn't matter but black looks best
Category: Sport & Outdoors