3D Sets Model 8 LED Lens Reflector (Collimator)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modification of lights for Model 8 (Buggster) to allow the use of a LED with lens reflector collimator.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 101
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Modification of the light assembly to allow the use of an LED and collimator.
The lights are slightly longer than the original ones, but not too much. I want to reduce this length to minimum, so the collimator is shorten to the length of 10mm, see the picture. The collimator can be shortened by sanding it down. It is made of PMMA, which is easy to sand. It fits to LED and reduce unnecessary space between LED and colimator.
The original parts Front Light Frame B left and Front Light Frame B right have been modified.
The LED and collimator produce a nice, focused beam of light.
For best results, Collimator sleeve should be printed of transparent material.
Non printed parts: