Nissan LEAF ZE0/AZE0/ZE1 data connector protection cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A protection cover for the data plug of a Nissan LEAF battery in stationary setup
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 96
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
This is a dust and water spill protection cover for the data connector of of Nissan Leaf 2011-2023 batteries. It slides on top of the connector, and uses two cable glands (a PG9 and a PG13.5) to access separately the CAN and a contactor control / BMS power cables.
It’s wide enough to cover soldered or spliced pigtails.
Two versions, a shorter and a longer neck version. The longneck offers better protection as it covers the socket too, however it can make more difficult to install the glands.
Material recommended to print PETG or ABS. Use 3 or 4 walls and 30% infill for improved strength.