1 / 3
leatherman rebar holster
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
this is a holster for the leatherman rebar. this is a quick release holster that can easily be used and printed.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 52
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
this is a remix of the model made by Roman Konecny. so full credits to him for making the main basis of the model.
I changed his design to use magnets which are 20mm in diameter, this was because those were the only magnets that I had laying around.
also I used a stronger magnet on top and a less strong one at the bottom, this makes it easier to get the leatherman rebar out of the holster. (but this is not mandatory)