1 / 21
Asus RT-BE88u Modular Router Stand w/ 140mm Fan + Filter 88u RT-AX88u — zdjęcie 1
1 / 21

Asus RT-BE88u Modular Router Stand w/ 140mm Fan + Filter 88u RT-AX88u

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A modular 140mm cooling fan stand for Asus 88u series routers, with Fan Filter and PWM Controller options.

Ocena
0 / 5
Polubienia
2
Pobrania
13
Wydruki
1
Wyświetlenia
151
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Made an updated version of my old Asus 88U 140mm fan cooling stand from ~10 years ago on thingiverse (https://www.thingiverse.com/thing:2197533), this time modular and with option of a 140mm dust filter and USB PWM controller holder, and the flexibility to print it on much smaller printers like the A1 mini. The fan on this new model also sits a lot closer to the bottom of the router and forces more air through it.

Designed to suit the Asus RT-BE88u, RT-AX88u and most likely the old AC88u (The first two I've physically tested, the later I'm pretty certain will work having previously owned one).

A link to the Tinkercad project is available if anyone wishes to iterate, adapt it to another router or check measurements.
https://www.tinkercad.com/things/1LCnTJoBo4i-asus-88u-router-stand-with-fan-filter-shared-link?sharecode=W3Y71B3HqHbfc6ByZwJm2WJ9R_9ymi89xZ4nSsxyc2E

There are two versions of the stands main body for different fans: 
One which suits a Noctua NF-A14 fan (or similar 140mm Noctua Fan at 26mm thickness).
The other without rounder corners which should suit most other 140mm PC fans (please check measurements, max 26/27mm fan thickness)


Please see pic for Temperature improvements. It was tested at 19°C ambient temperature (later part of Winter here in Aus). 
I keep my RT-BE88u is an Ikea Besta cabinet with the door cracked open about an inch, and it's idle temp tonight hovered between 60-61°C.
Within 15 minutes of being put on the stand/switched to ~50% fan speed I saw CPU temp drop 23°C under idle load (basically inaudible in a quiet loungeroom with no TV on)
On 100% fan speed, another 3°C temp drop (diminishing returns here).
Still Winter here, so interested to see what summer temperatures are.

In my past experience with the older AC88U router, cooling made it a lot more reliable. I know this newer BE88U router should run cooler than that by default, but it does give me piece of mind in summer and may prolong the service life of the router.

The optional 140mm Fan Filters and USB PWM fan controller (in 3d printed case) were found on Amazon Australia. There seems to be identical options on Amazon US, not sure if I can post Amazon links, so please study the photos of what I purchased and check measurements carefully.

It's all screwed together with 8 x M3 12mm long bolts and seems solid enough without needing glue (only 4x bolts required if you do not fit the optional filter tray). Optionally you can substitute: 4 x M3 10mm for the legs on both sides, and 4 x 16mm for the filter tray.

Would also suggest using a separate USB charger to power the fan rather than risk overloading the Asus USB port.

Fairly simple to bolt together, see pics, or see the tinkercad link.

If using another brand of 140mm fan, choose the body/part for "other 140mm fans"
I obviously can't design/test this for every variation in 140mm fan size, so the cutout for the fan is 141 x 141mm.
Fan fit may be loose or tight depending on your printer accuracy/fan.
Maximum thickness of the fan should be 26mm.. maybe 27mm.. more than that and the router may not sit on it properly.

The filter tray may need some smoothing/deburring depending on your printer. The filter is pressed into the tray and should hold tight. The tray itself may need a little force to click into place the first few times it's put into the stand.

Tagi