Remixed Action Hero in Ductwork Ornament
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed to add a flickering LED and batteries.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 33
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Print the image so that it is 63mm tall, wide is irrelevant as you'll trim-off the excess to fit the template.
Stick the image to the template aligning the flame with the LED, trim off the excess picture, and just press the whole template to the bottom. Holding it up to a window lets you see the hole through the printed image to align.
Hangs with fishing line through the two small holes, balances when using alkaline "AA"s in a battery holder.
Rear cover just hides the batteries and also acts as a counterbalance.
For a 2-2.2V flickering LED that draws 20 mA powered by 3V batteries, use a 47 Ohm resistor. Use an online LED-series resistor calculator for any other LED/battery combination. Alkaline "AA" batteries at 2400-3000 mAh should last 120-150 hours or 5-6 days continuously.