Greaseweazle v4.1 Station
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A remix of Bigby's Greaseweazle station for the v4.1 model.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 108
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A remix of Bigby's Greaseweazle station for the v4.1 model.
Changes from original model:
- Fits a Greaseweazle v4.1. Has a cutout in the back panel for the USB-C connector.
- Mounting posts for a LM2596 DC-DC power supply for the 5V rail (see picture for the style). These can be found dirt cheap on AliExpress.
- 8mm hole in back panel for a DC barrel jack.
For the wiring, I ran the input 12V through the front switch and back into a knockoff Wago-style lever connector. I used 5-conductor lever nuts, one each for 12V, 5V and GND. One could solder these connections but I opted to go this route for ease of disassembly in the future.
Hardware used:
M3x20 bolts (qty 12) for the case
M3 nuts (qty 12) for the case
M3x10 bolts (qty 7) for the drives
M2x6 bolts (qty 4) for the Greaseweazle and LM2596