Hamsa Wall Art | Bless This House | Protective Hand Line Art | No Supports
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hamsa hand wall art with "Bless this house" in the rim. Prints flat, no supports, 170 mm.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 6
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution
Hamsa — the protective hand — drawn as geometric line art. Fingers up, an eye in the palm, and "Bless this house" in the rim. Peace and fortune for whoever lives here.
170 mm across, 3 mm thick. Prints flat with no supports in about 23 g. Part of an eight-talisman fortune collection — link below if you want the full set.
PRINTING
- No supports. Prints flat on the bed, one piece.
- 0.2 mm layers, 100% infill — the piece is only a few lines wide, so infill costs you nothing and makes it rigid.
- Turn on the Arachne wall generator so the motto letters resolve cleanly.
- Ironing on top surfaces is worth it here. These are viewed from the front.
- A brim helps on the rim letters.
MATERIALS
Matte black PLA looks the most like a forged amulet. Silk gold or bronze reads as a lucky coin. White on a dark wall works well too.
MOUNTING
Far too light for screws. Double-sided foam tape or mounting putty is enough. No hanging hole — a hole in the motto spoils the letter.
FILES
STL for printing. STEP if you want to edit it in CAD as a proper solid. SVG and DXF if you would rather laser cut it in wood or acrylic.
Scaling: the lines are 2.6 mm wide at 170 mm. Scaling up in the slicer thickens the lines proportionally.