Windshield Washer Pump Seal Fiat
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Windshield Washer Pump Seal Fiat Panda
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 18
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
This is the gasket that is installed on the windshield washer fluid reservoir of a Fiat Panda. While the part is inserted into the washer fluid tank, the pump is inserted into the central hole.
It fits the original pump perfectly; in the photo you see, the pump is from a competitor—that cone sticks out because the design is different from the original, but it still fits perfectly without any gaps. I assume the same part works for other cars; I saw online that the replacement part for Audi, Volkswagen, and Mercedes is very similar. OEM 71752218 (?).
I recommend first placing the gasket in the reservoir, then inserting the pump; use silicone spray to help the plastic slide in more easily.
To print it, I used TPU from Overture.
Nozzle 0.4mm -> 0.16mm - 100% infill