Bogen 3066 Fluid Head Plate With 3/8" Slot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Quick release plate for Manfrotto/Bogen 3066 Head
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 34
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Quick release plate for Manfrotto/Bogen 3066 and other 4x5.5" tripod heads. I have modified this model to accommodate multiple 3/8" screws rather than the single 1/4-20 of the original model. I have also included my Fusion file for additional modifications as the original was only openable in Autodesk Inventor.
I would recommend printing in PETG with 3+ perimeters and 30% infill for maximum strength. I cannot guarantee long-term strength, but so far at least, it has felt very sturdy even with an URSA Mini Pro weighing in at ~17.5lbs(8kg), especially with a VCT plate to eliminate screwing and unscrewing.