Print an Egg Challenge (Official Model)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The official egg model of the "Print an Egg Challenge". Its a deceptively tough print thanks to the extreme angles at…
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 167
- Wydruki
- 2
- Wyświetlenia
- 643
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The official egg model of the "Print an Egg Challenge".
Its a deceptively tough print thanks to the extreme angles at top and bottom that with the added challenge of speed you'll soon be testing both your printer and your patience!
There are only 2 rules...
- Print it as fast as you can, however you want - the shortest time gets all the glory!
- The egg must be complete no holes or gaps.
Don't forget to upload your make with proof of your fastest time!
(Note: You can print using any style printer using any slicer software with any settings, but you have to print it in one piece start to finish and at 100% scale).
Category: 3D Printing Tests