Tyco Taiyo R/C Controller Transmitter lever 9v controller for 9.6v Wild Thing car
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Thumb controller for R/C car, fits Tyco Taiyo 9v transmitter / controller.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 23
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I made this to replace the thumb controller that had snapped. Although it has been designed for the Tyco Taiyo Wild Thing 9.6v Turbo Hopper, with a 9v controller / transmitter, it appears compatible with other transmitters from other car ranges using the same controller. They are not handed, the lever is compatible from what I could see for both the go/back and steering. The design uploaded here has a thicker thumb lever than is shown in the photo. I would suggest printing this in ASA because PETG is less durable. See my other designs for battery covers and spotlights. Licensed under CC BY‑NC‑SA. Non‑commercial use only. Remixing and sharing allowed under the same licence. Commercial manufacturing, resale, or distribution requires a paid licence - contact me for permission.