1 / 5
Axial SCX10 Skid Plate High Clearance — zdjęcie 1
1 / 5

Axial SCX10 Skid Plate High Clearance

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a skid plate designed for the Axial SCX10. It has a flat bottom and counter sunk screws for high clearance and…

Ocena
0 / 5
Polubienia
55
Pobrania
586
Wydruki
0
Wyświetlenia
2437
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a skid plate designed for the Axial SCX10. It has a flat bottom and counter sunk screws for high clearance and a pocket cut out for lighter weight and less filament/time when printed. Screw holes and counter-bores are according to M3x0.5mm metric standards.

Note: The 2 versions are different in the link mount / chassis rail screw holes. The "stock" version is designed for the stock chassis rails as it can only be tapped on the inner hole beyond the lower link cutouts and mounted with M3x35mm screws. The "full thread" version can be tapped from the outside all the way through allowing for the use of aftermarket chassis rails cut from other materials such as aluminium or carbon.

Print Settings

Printer Brand:

Creality

Printer:

CR-10S

Rafts:

No

Supports:

No

Resolution:

0.2mm

Infill:

100%

Category: R/C Vehicles

Tagi