QIDI Q2 UPGRADED TOOLBOARD CABLE MOUNT, CABLE CHAIN LIFT AND FIX 2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Extended a bit over 5mm up, fixes cable chain alignment and sag & stops toolboard cable from popping out the back
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 267
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
Prevents the cable from popping out loose.
helps lift a sagging and non sagging cable chain into alignment and clearance, especially in rear.
helps lift the PTFE tube path for smoother filament movement
added slot for up to 3mm cable/ zip tie. seems to hold cable well without cable tie too, especially when compared to old stock holder.
the surrounding cover will need to come off for instalation, and is a pain to put back on, so be wary that its a wiggle game.
i put the top part on first then pivoted it under the belts with gentle prying. then put zip tie on last.
Cable chain can also be lifted and or aligned a bit in the rear with a Allen key to loosen and tighten it to your liking.
as its a small part with thin sections, highly recommend printing with high temp unfilled filaments or any filament is ok so long as you can achieve good layer adhesion and know how to orientate it as well as other settings like cooling. I printed it in regular pc, but maybe pa6 will be ok too.
0.4 nozzle and as many walls as possible, full infill