Apple Watch series 7,8,9 45mm band with an integrated protective case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A flexible watch band with an integrated protective case, designed for the 45 mm Apple Watch Series 7, 8,9.
- Ocena
- 5 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 1
- Wyświetlenia
- 66
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
This flexible 3D-printed Apple Watch band combines an adjustable wrist strap with an integrated protective case.
It was originally designed and tested with an Apple Watch Series 9, 45 mm. It should also fit the 45 mm Apple Watch Series 7 and Series 8, which use the same 45 × 38 × 10.7 mm external case dimensions.
Compatible models:
Apple Watch Series 7 — 45 mm
Apple Watch Series 8 — 45 mm
Apple Watch Series 9 — 45 mm
It is not designed for 41 mm, 42 mm, 44 mm, 46 mm or 49 mm cases. Standard Apple Watch bands may share connector compatibility across several case sizes, but this design surrounds the complete watch body and therefore requires the exact 45 mm case dimensions.
Recommended materials:
TPU Air or VarioShore
Target hardness: approximately 80 Shore A
A lightweight, flexible print profile is recommended
Main features:
Flexible one-piece construction
Integrated protective watch housing
Adjustable wrist size
Tool-free watch installation
Raised perimeter around the display
Openings for the Digital Crown and side button
Ventilated sections for improved flexibility
Fully 3D printable
Customizable with different filament colors
Installation:
Gently flex the printed housing and insert the Apple Watch, following the intended assembly direction of the model. Make sure the watch is fully seated and that the printed material does not press against the display, Digital Crown or side button.
Wrap the band around your wrist and secure it using the integrated fastening points. Check that the closure is fully engaged before wearing the watch.
Fit and flexibility may vary depending on filament hardness, foaming level, extrusion calibration and printer tolerances. Adjust the TPU Air or VarioShore settings to obtain a soft but secure result around 80 Shore A.
Regularly inspect the band for cracks, tearing, layer separation or wear, especially around the watch housing and fastening points. Do not use it if any damage is visible. Printed flexible materials may react differently to sweat, moisture, heat and prolonged skin contact.
The Apple Watch is not included.
This is an independently designed accessory and is not affiliated with or endorsed by Apple. Apple Watch is a trademark of Apple Inc.