1 / 2
Flags to Stop Robotic Mowers from Climbing 56mm Trampoline Poles — zdjęcie 1
1 / 2

Flags to Stop Robotic Mowers from Climbing 56mm Trampoline Poles

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Simple clip-on flags for trampoline legs that keep the mower from getting suspended

Ocena
0 / 5
Polubienia
2
Pobrania
9
Wydruki
0
Wyświetlenia
102
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

These flags are designed to help stop robotic lawn mowers from trying to climb over low trampoline legs. They create a taller, more obvious obstacle that is easier for the mower to detect before reaching the horizontal frame.

They were designed with the Mammotion LUBA 2 in mind but should also be useful with other robotic mowers that use cameras, ultrasonic sensors, radar, or bump sensors. You can also create no-go zones, but if you shift the trampoline slightly later, then you have to re-do the zones. Clip-on flags move with the trampoline.

For best results, I recommend printing them in brighter colors like yellow or orange. High-contrast colors stand out clearly against green grass and can be easier for camera-based obstacle detection to recognize. White should also work well. Avoid green, brown, or transparent filament.

The shape and height of the flag are more important than the exact color, but bright colors give the best overall visibility. Scale up or down as needed for your trampoline.

Tagi