KINGrinder K6 Interlocking Coffee Bean Funnel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An interlocking coffee bean funnel for the KINGrinder K6 that is highly portable and aesthetically pleasant like origami
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 35
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Introduction
I've a portable espresso setup comprising IKAPE K2 Pro 58mm and KINGrinder K6.
Pouring beans into the KINGrinder K6 can be daunting at times when one is still a sleepyhead, beans landing outside of the grinder or bouncing out of it.
The current funnels are great but not exactly portable for my setup. Here is my interlocking coffee bean funnel.
Do post pictures of your makes!
Solution
Interlocking designs are pretty common like those drawer organisers. I took inspiration from it and created a funnel that can be easily assembled (and disassembled), yet sturdy enough to stay assembled on the counter/ table until you need to keep it.
Assembly is simply slotting the the angled end into the straight end of the other piece.
Done with it and need to travel? Disassemble it and bound them together using a rubber band.
Originally made one with three (3) sides but resulted in a small opening to the grinder. A four-sided one balances aperture size and assembly ease. Five-sided looks great but assembly becomes a chore.
Printing Instructions
Material: PETG or other food-safe materials recommended
Perimeter: 4
Top & Bottom Layers: 3
Support, Brim, Raft: None
Layer Height: 0.2mm
You will need to print four (4) pieces of the same part. Assembly is simply slotting the the angled end into the straight end of the other piece.