Cecotec ForceClima 9150 smartheating DUAL HOSE ADAPTER
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here is a solution to have a 15 to 30% efficiency gain on your portable AC.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 29
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
Hi, here is a dual hose adapter for a ForceClima 9150 smartheating.
On a portable air conditioner with an exhaust pipe, the indoor air is used to cool the hot radiator. That air after getting hot too is thrown out. The problem is that in this way the pressure inside your home becomes lower than outside. So warm air from outside comes into your home to fill this void. A very simple way to solve this problem is simply to take the outside air to cool the radiator. Therefore, you have the inside that is cooled and the radiator that is cooled by the outside air before being rejected from where it comes from. This creates two distinct circuits.
The adapter use a 159mm nozzle, so you need to buy a 160mm hose (i used Insulated ventilation hose)
The two hose needs to go outside.
Here is some measurements :
(AC full power)
(Aube, France)
One Hose :
Outside temp : 33°C (91°F) / Inside temp : 26°C (79°F) / 7°C difference
Dual Hose :
Outside temp : 33°C (91°F) / Inside temp : 24,7°C (76°F) / 8.3°C difference
Dual Hose is 18.5% more powerfull for the same electrical consumption.
I printed it on my BambuLab A1 using PETG-HF, 12h30 print, 522g on material.