Magnetic knife holder for Secumax 350
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a knife holder with magnets two 10mm magnets to attach a Secumax 350 to a metal wall.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 162
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I bought a Secumax 350 safety knife and wanted to have it handy quickly available.
This knife holder has space for two small cubic 10mm magnets and matching printer pause to insert them.
I bought magnets with holding force approx. 3.8 kg (approx. 37.3 N)
shifting force approx. 760 g (approx. 7,45 N ). The last is necessary because the knife has its own weight which then pulls the holder down on the metal wall.
Of course, you can also use stronger ones, then you just have to get the pressure off the metal pressure plate again.
Alternatively, you can also get 0.3/0.5/1mm thick silicone plates and glue them on to reduce slippage.