V1 Chronicles of Drunagor - Standard Monster Health Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
V1 Standard Moinster Health Stands I made for my Chronicles of Drunagor board game replacement
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 1
- Wyświetlenia
- 57
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is v1 of the model.
Please see the new model v2 here:
The original plate for inspecting monster health really sucks honestly and takes a lot of place on the table. Therefore I created this stand. Easy to print (with supports) and use a M3 screw to mount it.
This stand is for the regular white, gray, black monster or for companions only. For commanders or bosses I need to figure out how to make it in an appropriate way.
Important:
The model is currently in beta phase. If you have recommendations to improve it - please let me know.
Also this model is currently not optimized to reduce print time, but that's it. You can still print it and have fun with it.
Print settings:
I used 0.15mm (speed profile), 15% infill and Support everywhere.
Let Prusa Slicer change color for the health plate
Use a small M3 screw with two nuts. Use instant glue to fix them. Otherwise the nuts will be loosen while rotating the health plate.