Yarn holder/dispenser/Garnhalter (Salamander Edition)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Yarn holder for up to 6 spools of yarn
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 45
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This yarn dispenser consists of 3 parts. The parts can only be printed on a large 3D printer (e.g., Prusa XL).
The salamander designs are recessed into the surface by just a few hundredths of a millimeter. Therefore, they can be printed in a single color without any problems.
The bottom part has a hollow space where weights can be inserted to provide stability. This makes the dispenser more stable and prevents it from tipping over.
Yarn spools with a diameter of up to 160 mm can be unwound without any problems.
To secure the side panels, use 3 M4 heat-shrink nuts and 3 M4x16 mm cylinder head screws for each side.
The metal rods on which the yarn spools hang can be purchased at a hardware store. They should have a diameter of 10 mm.