1 / 1
Catapult — zdjęcie 1

Catapult

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A functional desktop catapult toy with a spring mechanism for target practice and launching light paper projectiles.

Ocena
5 / 5
Polubienia
0
Pobrania
11
Wydruki
1
Wyświetlenia
48
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

Assembly Instructions

Note: Set your build plate up, get the parts printed, and take them off the printer. You should have a trigger, an arm, and both side pieces.

  1. Start with the Right Side:

    • Take the right side panel and lay it out as your base.

  2. Place the Arm and Trigger:

    • Put the arm over its designated pin.

    • Put the trigger over its designated pin.

  3. Align the Left Side:

    • Line up the socket with the post, and align the pins with their corresponding holes on the opposite side piece.

  4. Snap it Together:

    • Force the gap closed by giving it a firm squeeze. It should make a very positive snap sound.

    • Verify that everything rotates freely and check out all the mechanism action!

Tagi