Taller lid for GBS Control Enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a taller lid for @Guybrush's custom GBS Control enclosure, extended to fit bigger ESP8266 modules.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 61
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
This is a taller lid for @Guybrush's custom GBS8200 enclosure, extended to fit bigger ESP8266 modules.
The ESP used in his build is an Amica NodeMCU module, which is 48 x 26 mm
The module I used is some generic one I got off Amazon which is 58 x 31 mm
The lid is 9mm taller than the original.
This size difference makes the module stick out of the top of the enclosure, so because it was less filament to reprint I decided to make the lid taller rather than extending the enclosure itself. I also think it looks more well rounded this way and I took the opportunity to add my own joke branding to it. You can use my FreeCAD file to make your own if you want.