LayersFactory
Zgłoś model
1 / 1
FS2026 Lids for PC4-M10 Bowden Couplers — zdjęcie 1

FS2026 Lids for PC4-M10 Bowden Couplers

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

xeemz

xeemz

@xeemz

Modified inlet to accept PC4-M10 Bowden coupler, side and top

Ocena
0 / 5
Polubienia
13
Pobrania
51
Wydruki
0
Wyświetlenia
207
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
GNU General Public License v2.0
SzczegółyPliki (16)Wydruki i komentarze (Wydruki: 0) (Komentarze: 7)Remiksy (0)Kolekcje (14)Powiązane

I liked using the PC4-M10 Bowden couplers in the 2025 dryboxes and I wanted to stick with them. The JurB's remix used a separate piece that needed to be glued in, which I did not like. So I added threads directly into the lid itself.

While I was at it, I also created a version with the threading on top of the lid for those that are interested.

I used WorkPlayRest's "Best" remix as a base, because I liked the various improvements.

After some testing, I tried to improve on my remix to make it easier to pull filament through the opening but it only printed properly on the side version. Both versions work, but I like v2 slightly better if printing the lid with side threading.

Update 2026-08-27: Got the v2 updates printing in both orientations now.

Files Uploaded:

  • v2 (recommended)

    • Lid for 3mm Foam - Side v2

    • Lid for 3mm Foam - Top v2

    • Lid for Original Gasket - Side v2

    • Lid for Original Gasket - Top v2

  • v1 (obsolete)

    • Lid for 3mm Foam - Side v1

    • Lid for 3mm Foam - Top v1

    • Lid for Original Gasket - Side v1

    • Lid for Original Gasket - Top v1

Print settings:

  • .20mm Structural

  • Infill: Gyroid

  • Supports: None

My setup:

Non-affiliate Amazon links for extra parts: