Dyson stick vacuum carry handle with better tool mounts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Carry handle for Dyson vacuum with tool mounts that accommodate multiple orientations
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 93
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
I wanted a way to carry accessory tools attached to the vacuum, and while many options exist on printables, the design I remixed for this was the best option because it also includes a solid carry handle that the vacuum desperately needs. I added the ability to mount tools in two different orientations which was enough work that I figured I should share the model for others as well. The second orientation makes it possible to use with one of the popular brushes in my household, shown in the last couple pictures.
Check out the original design for print orientation recommendations - it print great without supports. I used PLA with 0.25mm layers and 15% gyroid infill. You need two M3x30 screws for assembly.
The original design was made for a V11 but it works great on my V8, just mounted a few inches further down the tube at the proper balance point. It probably works well on several other Dyson models too.