TCG soft sleeve card storage trays with dividers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3-drawer storage system designed for standard TCG cards Slotted trays for divider Fits soft sleeved cards
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 28
- Wydruki
- 1
- Wyświetlenia
- 118
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
3-drawer storage system designed for standard TCG cards
minimal filament usage
fits soft sleeved and non sleeved cards
Slotted trays with dividers
Available wall thicknesses in this upload:
• 2.0 mm – Maximum rigidity, best for heavy stacking
• 1.6 mm – Excellent balance of strength and material use
• 1.2 mm – Good everyday strength
• 1.0 mm – Lightest version
Also 2mm and 1.6 mm trays with slots for a spacer/divider to keep cars standing in partially full boxes
Key features:
• Designed around standard TCG cards or soft sleeved cards
• Smooth sliding drawers with finger-pull notches
• Optimized thin bottoms and back walls to save filament while keeping structural integrity
• Clean, simple aesthetic that prints well in any color
Print recommendations (0.4 mm nozzle):
• Layer height: 0.20 mm or 0.24 mm
• Walls: 3–4 (or match the model’s designed thickness)
• Infill: 15–20% gyroid or cubic
• Top/Bottom layers: 4–5
• No supports needed
If you print one, please post a make — I’d love to see your colors!