Coupler Cap for PC4-M10 Bowden Couplers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cap for PC4-M10 that holds 3D filament
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 119
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Originally I remixed GunplaMark's 2025 coupler cap to attach to my drybox similar to his FS2026 container plug. Unfortunately, the cap did not hold TPU very well when using an auto-rewind system. Luckily, I found Phil Caruso made a remix that held filament better without gripping it too tight. I skipped his newer versions since they were more complicated and the one I chose was enough.
The only downside is that Phil Caruso's version was round and I liked how the original coupler cap had a hexagon shape to make it easier to align. I copied GunplaMark's hexagon shape over and added an a loop to attach it to the PC4-M10 Bowden coupler and this is the result.
This model can, in theory, be used with any filament drybox storage system using the PC4-M10 Bowden coupler. I use it with my remix of a remix of GunplaMark's FS2026 lid.
I'm including my first attempt with GunplaMark's coupler cap if anyone is interested. Also, including a version of the remix without an attachment strap for anyone that does not need it. I find it helpful to have a spare coupler without a strap laying around sometimes.
Files uploaded:
Coupler Cap v1 with Strap (not recommended)
Coupler Cap v2 with Strap
Coupler Cap v2
Print settings:
.20mm Structural
Infill: Gyroid
Supports: None
Recommended filament: TPU (Flex) 95a
My setup:
Latch (x4): WorkPlayRest's Improved Latch
Support Left/Right: GunplaMark's FS2026 parts
Hygrometer Adapter: Universal Round Hygrometer Adapter and NFC Tag Holder
Coupler cap: Coupler Cap v2 with Strap
Desiccant Bin: paw3D's remix
Rewinder (c-clip, clutch, cover, dial, interface, slip disc): GunplaMark's FS2026 parts
Rewinder Nut: Pro3Druk's remix
Rewinder Shaft: PapaWagon's extended shaft
Non-affiliate Amazon links for extra parts:
PC4-M10 Bowden coupler: https://www.amazon.com/dp/B0F6CQT461
Bearings: https://www.amazon.com/dp/B0F1TGX3PR
Badge Reels: https://www.amazon.com/dp/B0BD1W4X3C
Hygrometer: https://www.amazon.com/dp/B0DGDVR4L2
Desiccant: https://www.amazon.com/dp/B0784W1R77
NFC tag: https://www.amazon.com/dp/B087M9FLM4