Yggdrasil Buttons — Norse world-tree sewing buttons, 15 / 20 / 25 mm, shank or 2-hole
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Real, wearable sewing buttons with the Norse world-tree on the face.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 30
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution
Sewing buttons with the Norse world-tree on the face — made to be actually sewn onto a cardigan.
Five Files
15 / 20 / 25 mm (24L / 32L / 40L) — hidden tunnel shank
15 / 20 mm — classic 2 holes, 1.9 mm
HIDDEN TUNNEL VERSIONS The underside carries a blind slot, open downward only. Come up through the fabric so the needle emerges inside one end, pass the thread under the roof, go back down at the other end, 4-6 passes, knot underneath. The fabric closes the open side, so the thread is captured exactly as by a moulded shank — and the face stays whole, no holes bored through the tree. The slot is only 55% of the diameter on purpose: a full-width tunnel exits at the rim, putting both stitches outside the footprint so the button rocks.
TWO-HOLE VERSIONS Ordinary bar stitch. The bores sit in the clear gap between canopy and roots, cleared back 0.7 mm so the thread does not chafe on a branch.
TWO COLOURS Each button ships a *_2c companion: the same geometry as two named solids (body + tree). Import, right-click, Split to Parts, one filament each. Do not print both the plain file and its _2c — same object. No AMS? Pause at the face height to swap colour; the tree stands 1.0 mm proud.
PRINTING Face up, flat, no supports, no brim. 0.2 mm layers, 3+ walls. PETG survives laundry better than PLA. About 2 g and 15 min for a 20 mm button.
Parametric source included: openscad -D D=18 gives a correct 18 mm button, every motif stroke floored at one nozzle width.
