Plastic Bottle Neck Finish SP-410 (28mm) Joiner
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Plastic Bottle Neck Finish SP-410 (28mm) Joiner for water vortex
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 53
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other 3D Objects for Learning
- Licencja
- Creative Commons — Attribution
Plastic Bottle Neck Finish SP-410 (28mm) Joiner
Based on the SP-410 (28mm) specifications for plastic bottle neck finish
Primarily made to join two bottles together to make water vortex when draining from one to the other
Included a insert that can be added into the joiner
Printed: Prusa XL, 0.6 Nozzle, 0.2 Layer Height
No supports
Add Fuzzy skin to outer surface for better grip
Test fitted on McDonalds water bottles (as shown) does screw onto threads but can bind.
Also have included the model of the cap and neck finish
I made SP-410 neck finish first but found a better thread match for the bottles i had available was PCO-1881