Outside Caliper 0-200mm (parametrised OpenSCAD)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Caliper for measuring hard to reach spots (e.g. couch armrest) where common calipers won't be suitable.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 34
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
Caliper for measuring bulky uneven objects - such as a couch armrest's width
The model should fit to 220 x 220 print bed - print the pointer arm and scale arm separately (see one of the screenshots).
For assembly print the hardware.stl - a hexnut pin and a thumbscrew. The pin fits snugly into the thumbscrew. Alternatively use your go-to bolts and screws (M5).
The pointer arm has these millimeter readout slits. If you care about millimeter precision, either adjust your print settings or clean up the holes after print (e.g. with a pin or drill).
Feel free to adjust the attached openscad source code to fit your needs and report back with the results!
Happy measuring!
