Easythreed X1 spool holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Since I have installed risers to the base of the printer, the provided spool holder could not be used any more. So I…
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 158
- Wydruki
- 2
- Wyświetlenia
- 1043
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Since I have installed risers to the base of the printer, the provided spool holder could not be used any more. So I desgined one in Fusion 360.
The spool holder works fine for max. 500gr spools.
Updated (Apr 16th, 2020):
Added a version which allows for 1 kg spools to be used. Also added some holes to be able to use tie wraps to secure it to the frame.
Updated (Apr 17th):
Uploaded 1kg Stl with correct print orientation
Updated (Juli 1st, 2020:
I have spilt the models into several parts making it possible to print the spoolholder on the Easythreed X1 as well.
The individual parts are still large, so you will have to print without a skirt. Using a skirt is possible but make sure you don't extend outside your printers printing area.
For the smaller spoolholder print one of top and bottom and two tabs
- X1 Spoolholder - Top
- X1 Spoolholder - Bottom
- X1 Spoolholder - Tab (2x)
For the larger 1kg spoolholder print one of top, bottom and rod and two tabs
- X1 Spoolholder 1kg - Top
- X1 Spoolholder 1kg - Bottom
- X1 Spoolholder 1kg - Rod
- X1 Spoolholder 1kg - Tab (2x)
The joins have been designed with some clearance in mind, but depending on your printers tolerance some post-processing might be required. After that just glue or press the parts together.
Print Settings
Printer Brand:
Creality
Printer:
CR-20
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2
Infill:
10-20
Filament: Any PLA Any
Category: 3D Printer Accessories