Snapmaker U1 SoC Fan (RockChip)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A quick-and-dirty bracket design for a 4010 fan to cool the Snapmaker U1's Rockchip (SoC)
- Ocena
- 5 / 5
- Polubienia
- 1
- Pobrania
- 16
- Wydruki
- 1
- Wyświetlenia
- 273
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A quick-and-dirty mount designed for a 4010 fan to cool the Snapmaker U1's Rockchip SoC;
I attached all-copper Raspberry Pi heatsinks to the chips.
The photos also show a stepper driver mod (LINK) that I applied to my unit (only attempt this if you really know what you are doing, as it can very easily damage the mainboard!!!).
It should fit even without this stepper mod—you will need three longer screws regardless. Please note that the mount's leg on the bottom right passes directly (and very closely) over a connector; if you need to access that cable, you will have to remove the mount.
The photos show extensive modifications intended to heat the build chamber of a printer not designed for this purpose—please do not attempt to replicate this. Any modifications to your printer are made at your own risk and will void the manufacturer's warranty.